LOCATE A DEALER | FIND A CONTRACTOR
LOCATE A DEALER | FIND A CONTRACTOR
  • Mix & Match
  • Paint Calculator
  • Boysen KNOxOUT

BOYSEN® DECORe™ Classic

BOYSEN® DECORe™ Classic

DESCRIPTION: BOYSEN® DECORe™ Classic is a unique, water- based decorative paint system that can simulate the complex texture and distinctive finish of the European masters right in your home. Unlike traditional faux finishes, BOYSEN® DECORe™ Classic does not need elaborate intermixing of colors, layering techniques or sophisticated equipment. Simple and effortless brushing is all that's required to achieve this very exquisite finish.

PRINCIPAL USES: It is ideal for interior concrete walls, properly primed wood, and drywalls. Avoid using product on high friction areas like fixtures and furniture.

FINISH:
Undercoat B-4605: Flat
Base B-4610: Matte

DRY TIME (TO TOUCH):
Undercoat B-4605: 30 minutes
Base B-4610: 2 hours

THEORETICAL COVERAGE PER 4-LITERS:
Undercoat B-4605: 25 - 30 sq. m.
Base B-4610: 25 - 30 sq. m.
*Depending on surface texture and porosity

TINTING: 
Undercoat B-4605: Not applicable
Base B-4610: Available toners can be added up to 200 mL per 4-Liters of DECORe™ Base

THINNING SOLVENT: 
Undercoat B-4605: Use as supplied
Base B-4610: Do not dilute DECORe™ Base and toner mixture with water or any solvent

CLEAN-UP SOLVENT: Water

PACKAGING: 4-Liters

APPLICATION:
Undercoat B-4605: By brush or roller
Base B-4610: DECORe™ brush and scraper

AVAILABLE TONERS:
B-4730    Light Gray
B-4741    Aqua Blue
B-4742    Light Blue
B-4743    Deep Blue
B-4750    Dark Green
B-4762    Medium Yellow
B-4763    Bright Yellow
B-4771    Soft Red
B-4772    Brick Red
B-4780    Brown

DESCRIPTION: BOYSEN® DECORe™ Classic is a unique, water- based decorative paint system that can simulate the complex texture and distinctive finish of the European masters right in your home. Unlike traditional faux finishes, BOYSEN® DECORe™ Classic does not need elaborate intermixing of colors, layering techniques or sophisticated equipment. Simple and effortless brushing is all that's required to achieve this very exquisite finish.

PRINCIPAL USES: It is ideal for interior concrete walls, properly primed wood, and drywalls. Avoid using product on high friction areas like fixtures and furniture.

FINISH:
Undercoat B-4605: Flat
Base B-4610: Matte

DRY TIME (TO TOUCH):
Undercoat B-4605: 30 minutes
Base B-4610: 2 hours

THEORETICAL COVERAGE PER 4-LITERS:
Undercoat B-4605: 25 - 30 sq. m.
Base B-4610: 25 - 30 sq. m.
*Depending on surface texture and porosity

TINTING: 
Undercoat B-4605: Not applicable
Base B-4610: Available toners can be added up to 200 mL per 4-Liters of DECORe™ Base

THINNING SOLVENT: 
Undercoat B-4605: Use as supplied
Base B-4610: Do not dilute DECORe™ Base and toner mixture with water or any solvent

CLEAN-UP SOLVENT: Water

PACKAGING: 4-Liters

APPLICATION:
Undercoat B-4605: By brush or roller
Base B-4610: DECORe™ brush and scraper

AVAILABLE TONERS:
B-4730    Light Gray
B-4741    Aqua Blue
B-4742    Light Blue
B-4743    Deep Blue
B-4750    Dark Green
B-4762    Medium Yellow
B-4763    Bright Yellow
B-4771    Soft Red
B-4772    Brick Red
B-4780    Brown

SURFACE PREPARATION:
New Concrete
Allow new concrete to dry for 14 - 28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar. If neutralizing, treat surface with a solution of 1 part BOYSEN® Masonry Neutralizer B-44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting. However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.

Wooden Surfaces
Surface to be painted should be clean and dry, free from dust, dirt, and other foreign matter. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.

Drywall Substrates
Install and secure joints as per manufacturer’s recommendations.

Repainting
Scrape off all loose, scaling, flaking, and peeling paint as necessary. Make sure the surface is clean, dry, and good weather persists prior to painting.

For repainting concrete with chalky old paint, use BOYSEN® Chalk Blocker™ B-7304 as surface conditioner. In case of mildew infestation, treat with a bleach solution (1:3, laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before cleaning off residue. Let dry.

For repainting other surfaces such as wood, apply the appropriate primer before recoating.


PAINTING SCHEDULE:
Apply BOYSEN® Permacoat™ Flat Latex B-701 as primer for concrete. For wood, use BOYSEN® Flatwall Enamel B-800.

After primer application, apply BOYSEN® DECORe™ Undercoat B-4605 by brush or roller and fully cover the surface. Dry for 1 hour before applying the finishing layer.
Note: The design can only be achieved using BOYSEN® DECORe™ Undercoat.

After choosing the desired color, mix BOYSEN® DECORe™ Toner into BOYSEN® DECORe™ Base B-4610. A color can be applied in different tones by varying amount of toner used, either Full, One-half, One-fourth, or any other proportion depending on desired shade. Stir until uniform consistency is achieved. DO NOT THIN MIXTURE WITH WATER OR ANY SOLVENT.

Using a BOYSEN® DECORe™ brush, apply from top corner, working with short crisscrossing strokes. If a more uniform pattern is desired, brush through surface while the paint is still wet.
Note: The design may not be achieved if a different paintbrush is used.

Wait for 8 - 10 minutes after applying BOYSEN® DECORe™. Then, lightly comb the surface using the plastic scraper with long crisscrossing strokes, the scraper inclined and close to the surface.

Choose Border
B48101
 
B48102
 
B48103
 
B48104
 
B48105
 
B48106
 
B48101
 
B48102
 
B48103
 
B48104
 
B48105
 
B48106
 

Choose Color

For technical reasons connected with color reproduction and paint manufacturing, these patterns may not exactly match the paint color.

1 Toner B-4730 Light Gray
 
½ Toner B-4730 Light Gray
 
¼ Toner B-4730 Light Gray
 
1 Toner B-4741 Aqua Blue
 
½ Toner B-4741 Aqua Blue
 
¼ Toner B-4741 Aqua Blue
 
1 Toner B-4742 Light Blue
 
½ Toner B-4742 Light Blue
 
¼ Toner B-4742 Light Blue
 
1 Toner B-4743 Deep Blue
 
½ Toner B-4743 Deep Blue
 
¼ Toner B-4743 Deep Blue
 
1 Toner B-4750 Dark Green
 
½ Toner B-4750 Dark Green
 
¼ Toner B-4750 Dark Green
 
1 Toner B-4762 Medium Yellow
 
½ Toner B-4762 Medium Yellow
 
¼ Toner B-4762 Medium Yellow
 
1 Toner B-4763 Bright Yellow
 
½ Toner B-4763 Bright Yellow
 
¼ Toner B-4763 Bright Yellow
 
1 Toner B-4771 Soft Red
 
½ Toner B-4771 Soft Red
 
¼ Toner B-4771 Soft Red
 
1 Toner B-4772 Brick Red
 
½ Toner B-4772 Brick Red
 
¼ Toner B-4772 Brick Red
 
1 Toner B-4780 Brown
 
½ Toner B-4780 Brown
 
¼ Toner B-4780 Brown
 
COMPANY INFO PRODUCTS TOOLS QUICK LINKS CONNECT WITH US

© 2018 Boysen Paints. All Rights Reserved.


© 2018 Boysen Paints. All Rights Reserved.


By clicking "I Accept", you explicitly and unequivocally consent to the collection, processing and storage of your personal data and the use of cookies by Pacific Paint (Boysen) Philippines, Inc. for the purposes described in the Privacy Policy. Please make sure that you have fully read and comprehend the terms in our Privacy Policy before giving your consent and by continuing to browse our site.