|
DESCRIPTION: BOYSEN® Clear Acrylic Emulsion is an acrylic type coating that acts as an intermediate layer against dampness on interior masonry.
PRINCIPAL USES: Improves the performance of latex paint applied on concrete in damp conditions. It may also be used as preparation for the installation of wallpapers.
DRY TIME:
Touch: 30 minutes
Recoat: 2 hours
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
TINTING: Not applicable
THINNING SOLVENT: Use as supplied.
CLEAN-UP SOLVENT: Water
PACKAGING: 1-Liter and 4-Liters
APPLICATION: By brush, roller, or airless spray
|
|
DESCRIPTION: BOYSEN® Clear Acrylic Emulsion is an acrylic type coating that acts as an intermediate layer against dampness on interior masonry.
PRINCIPAL USES: Improves the performance of latex paint applied on concrete in damp conditions. It may also be used as preparation for the installation of wallpapers.
DRY TIME:
Touch: 30 minutes
Recoat: 2 hours
THEORETICAL COVERAGE PER 4-LITERS: 25 - 30 sq.m.
*Depending on surface texture and porosity
TINTING: Not applicable
THINNING SOLVENT: Use as supplied.
CLEAN-UP SOLVENT: Water
PACKAGING: 1-Liter and 4-Liters
APPLICATION: By brush, roller, or airless spray
|
|
SURFACE PREPARATION:
Allow new concrete to dry for 14 - 28 days under normal weather conditions before painting. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar.
If neutralizing, treat surface with a solution of 1 part BOYSEN® Masonry Neutralizer B-44 diluted in 16 parts water, applying liberally by brush or roller. Let dry overnight before rinsing with water to remove white crystals that form on the surface. Let dry before painting.
However, if the concrete has been cured for more than 28 days, there is no need for neutralizer.
PAINTING SCHEDULE:
Primer: BOYSEN® Permacoat™ Flat Latex B-701
2nd coat: BOYSEN® Clear Acrylic Emulsion B-700
Topcoat: BOYSEN® Permacoat™ Latex (Flat, Semi-Gloss, Gloss)
|
