Titan Superflex™ is a self-priming flexible coating that forms a durable film, which reflects ultra-violet light and prevents the passage of water and water vapor, recommended for both interior and exterior concrete surfaces. It cures to an adherent film on properly prepared surfaces capable of bridging hairline cracks on vertical walls. The smooth nature of the film minimizes dirt pick-up and ensures long term durability and color retention.
USE:
Suitable for the protection and decoration of concrete surfaces.
PROPERTIES:
Appearance: Eggshell
Coverage: Approx. 18-22 sq.m. per 4 liters per coat (depending on surface porosity and method of application).
Drying time: Surface dry in one (1) hour. Recoat after three (3) hours under normal weather condition.
|
SURFACE PREPARATION:
1. Allow new masonry to dry for 14 to 28 days under normal weather conditions. Surface to be painted should be clean and dry, free from oil, grease, dust, dirt, contaminants, and all loose grit and mortar.
2. Treat new masonry with a solution of 1 part Boysen® Masonry Neutralizer #44 diluted in 16 parts water, applying liberally by brush or roller.
3. Let it stand overnight before rinsing with water or rough sanding to remove white crystals that form on the surface.
4. Let dry before painting.
APPLICATION & THINNING:
1. Prime bare substrate with Titan Superflex™.
2. Apply Boysen® Acrytex™ Cast #1711by mortar gun spray for desired texture.
3. Apply at least two (2) more coats of Titan Superflex™ by brush, roller or airless spray.
Decreasing the number of coats will reduce the paint performance.
Cleaning:
Clean all tools and equipment after use with clean water.
Thinning:
Brush and roller: 0-5% water. The first coat may be thinned up to 10% on very absorbent surfaces. Stir well before use. Airless spray: 0-10% water.
Caution:
Do not use when humidity is high as surface condensation (heavy moisture), will adversely affect the paint performance.
|